Ile-iṣẹ ẹrọ inaro iyara-giga(iṣinipopada-apa mẹta) jara
Imọ paramita
| Awoṣe | Ẹyọ | VMC-SL850 | VMC-SL1160 | VMC-SL1370 | VMC-SL1580 |
| X-ajo | mm | 800 | 1100 | 1300 | 1500 |
| Y-ajo | mm | 500 | 600 | 700 | 800 |
| Z-ajo | mm | 550 | 700 | 700 | 800 |
| Ijinna lati oju ipari spindle si dada iṣẹ | mm | 115-665 | 110-810 | 140-840 | 85-885 |
| Ijinna lati ile-iṣẹ spindle si oju aabo ọwọn | mm | 550 | 686 | 752 | 875 |
| Iwọn tabili iṣẹ (L*W) | mm | 1000×500 | 1200×600 | 1500×700 | 1700×810 |
| Ikojọpọ | KG | 600 | 800 | 900 | 1500 |
| T-Iho | mm | 15-18/125 | 5-18/120 | 5-18/145 | 5-18 / 147.5 |
| (Nọmba*iwọn*ijina) | |||||
| Taper sipesifikesonu | BT40 | BT40 | BT40/BT50 | BT40/BT50 | |
| Max.spindle yiyi | RPM | 10000/12000 | 10000/12000 | 8000/10000 | 8000/10000 |
| Moto Spindle | Kw | 7.5 | 11 | 15 | 15 |
| 3-ake motor (X/Y/Z) | Kw | 2.0 / 2.0 / 3.0 | 3.0 / 3.0 / 3.0 | 3.0 / 3.0 / 3.0 | 4.5 / 4.5 / 4.5 |
| Iyan Iṣakoso eto | Japan MITSUBISHIM80 tabi FANUC 01 MF | ||||
| X/Y/Z iyara gbigbe iyara | m/min | 48/48/48 | 36/36/24 | 30/30/24 | 20/20/16 |
| Ige iyara kikọ sii | mm/min | 1-10000 | 1-10000 | 1-8000 | 1-6000 |
| Ipo deede | mm | JIS ± 0.005/300 | JIS ± 0.005/300 | JIS ± 0.005/300 | JIS ± 0.005/300 |
| Ipeye atunwi | mm | JIS ± 0.003/300 | JIS ± 0.003/300 | JIS ± 0.003/300 | JIS ± 0.003/300 |
| Afẹfẹ titẹ | kg/cm² | ≥6 | ≥6 | ≥6 | ≥6 |
| Ọpa irohin agbara | Nkan | 24 | 24 | 24 | 24 |
| Iwọn ẹrọ (isunmọ) | T | 5 | 7 | 8 | 10.5 |
| Iwọn ẹrọ (L*W*H) | mm | 2600×2650×2850 | 3100×3000×2800 | 3700×3350×3300 | 4300×3200×3400 |
Kọ ifiranṣẹ rẹ nibi ki o si fi si wa
